General Transfer Board with Cut Out

The general transfer board with cut out is ideal for short distance transfer from bed or chair to wheelchair, where the wheelchair has large wheel, the cut out sits around wheel and helps to alleviate sideways movement of board. Also allows for more direct transfer onto seat.

S.W.L 110 Kilos

General Transfer Board with Cut Out
16033 P.V.C. construction, 680mm x 280mm x 6mm with cut out. Unique low friction coating gives more slip less grip. Rounded edges and radius corners provide a smooth and safe transfer for both client and carer. Available with or without grip on the underside. Hygienic; easily cleaned by wiping over with mild detergent or a non-alcohol based disinfectant.
Prod No; 16033 - GENERAL TRANSFER BOARD WITH CUT OUT 6mm PVC Prod No; 16039 - GENERAL TRANSFER BOARD WITH CUT OUT 6mm PVC INC GRIP

IMPORTANT NOTICE TO PURCHASER: The following is made in lieu of all warranties, expressed or implied. Seller`s and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct, indirect or consequential arising out of the inability to use this product. Before using, user shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force affect unless in agreement signed by officers of seller and manufacturer. All Tech-Assist Products are designed to assist nurses and patients. The patients nursing care should never be neglected, and when Tech-Assist Products are in use, continual assessment should be carried out to ensure the products are still appropriate for the patients condition. Regular maintenance inspection is necessary, and damaged items should be withdrawn from use until rectified.